Re-Enterable Gel & Fillers

MAGIC GEL is a two-component non-toxic insulating and sealing gel. It’s suitable for low voltage applications and when cast in suitable junction box it ensures an IP68 degree of protection. Once poured, the insulation, characterised by very low viscosity, surrounds and envelopes any type of material.

  • Suitable for high-temperature applications +200°C
  • Mixing Ratio 1:1
  • Cross linking in only 10 minutes at 23°C!!
  • Soft-elastic, vibration absorbing, removable by hand
  • Non-toxic and safe
  • No shelf life!!
  • Available in 1ltr and 10ltr pack

WONDER GEL is a transparent single component insulating gel in cartridge, complete with nozzle, to instantly protect new installations and oversee maintenance of all types of electrical connections. IP68 degree of protection.

  • Ready to use! No mixing required! Pre-cross-linked! No need to wait!
  • Can be used with standards guns
  • Extremely rapid to use even in difficult positions
  • Can be applied in all weather conditions – Summer Sun or Rain
  • Suitable for hight temperature applications +200°C
  • Self-levelling and self-vulcanizing
  • Installer’s best friend!

RAYRESIN is a bicomponent epoxy resin for electrical insulation and for the protection of thermosetting LV and MV accessories. The two components, the base resin and hardener, are mixed in contact to trigger the cross-linking reaction. Excellent bonding to metal, plastic and rubber components. 

  • Suitable for installation up to 1KV
  • Hardness 70 Shore D
  • Cross linking in 20 minutes at 20°C
  • Available in bicomponent single dose bags & tin

TECHNO GELGUM is a single bottle two-component insulation with very high dielectric, thermal and sealing characteristics. Waterproof and re-enterable! For power cable, telecom cable and electronic circuit connections. It’s elastic and flexible like gel, but also tough and dry like rubber.

  • Suitable for installation up to 1KV
  • Waterproof > 1MPa
  • UV Resistant & suitable for high temperatures
  • Suitable for high depths under water
  • Suitable for installation in salt water (sea) and in chlorinated water (pools)
  • Removable!

MAGIC RUBBER is a fast cross linking bicomponent insulating liquid rubber. It’s extremely conformable and fluid, flexible, elastic and re-enterable in just a few minutes, transforms into a rubber with very high dielectric, thermal, mechanical and elastic characteristics.

  • Suitable for installation up to 1KV
  • Ideal for casts and moulds
  • No shelf life