Cable Cleats are an essential component when installing cable and are recommended in almost every electrical installation to secure cables at intervals along the length of the cables. It ensures the retention and support of cables, resist the cable movement and provide resistance to electro-mechanical forces. These are suitable for Sunlight (UV) and weather resistant in accordance with BS EN 50368:2003 / IEC 61914:2015

A huge range of cable clamps and cleats are available from single way, trefoil to quad cleats in both polymer and stainless-steel finish.

• Single Way Telcleat (TCC Series) – One-piece, single fixing design. This is suitable for single cable diameter 10mm to 51mm and manufactured from Low Density Polythene/LSZH.
• Single Way Plastic Two Bolt Cleat (TB Series) – Are suitable for single cable diameter 50mm to 94mm and manufactured from black high-density nylon 66/LSZH. It can be double stacked on common fixings.
• Claw Cleat Aluminium (ACC Series) – Two-piece, single fixing design. This is suitable for single cable diameter 10mm to 51mm and manufactured from aluminium alloy and suitable for operating temperature -60°C to +105° This can be stacked to a maximum of three on one fixing. Galvanised coated Aluminium versions are available for harsher environment as ACCG Series. 
• Single Way Two Bolt Aluminium (ATC Series) – Two-piece, two fixing design. This is suitable for cable diameters 51mm to 114mm and manufactured from aluminium alloy. This is suitable for LV & HV cables and for operating temperature -60°C to +105°C. Can be double stacked on common fixings. Epoxy coated versions available for harsher environments.
• Single Way Two Bolt Cast Iron (CITC Series) – Two-piece, two fixing design. This is suitable for cable diameters 51mm to 114mm and manufactured from cast iron. This is suitable for LV & HV cables and for operating temperature -60°C to +120°C. Can be double stacked on common fixings. Galvanised coated Aluminium versions are available for harsher environment as CITCG Series.
• Orion Trefoil Cable Cleat Aluminium (ATFC-SP Series) – This is designed for single core cables laid in trefoil formation, suitable for cable diameters 15mm to 155mm and manufactured from aluminium alloy. Single or two bolt fixing ideal for LV, MV and HV cables.
• Libra Trefoil Cable Cleat Aluminium (ATFC Series) – This is designed for single core cables laid in trefoil formation, suitable for cable diameters 15mm to 76mm and manufactured from LM6 grade die cast aluminium. Supplied complete with top fastening. Suitable for use at a maximum system fault level of 30kA rms. Available in single fixing and two fixings.
• Multicleat/Multistrap Trefoil Cable Cleat (AMC Series) – Suitable for use with cable diameters 24mm to 145mm. It consists of Aluminium or Stainless-Steel bases with a non-magnetic 316L stainless-steel strap complete with tensioning clip. The Multicleat base is suitable for use with any ladder and tray systems. The key advantage with this type is that the strap can be wrapped around the cables and base without lifting the cables. Multistraps are used as intermediate restraints and are positioned centrally between a pair of multicleats on all horizontal and vertical straight runs.

Epoxy coated Aluminium versions are available for harsher environment as AMCC Series.